Automatic Mortar Spray Machine is suitable for reinforcement, leveling, painting and pumping. It can be used for ordinary mortar plastering of interior and exterior walls, plastering plaster, thermal insulation mortar, bonding mortar, lime plastering, repairing plastering, face ash, bonding tiles and filling mortar.
You can use both pre-mixed and pre-mixed mortar at the same time. By changing the spray gun and the screw pump, you can adjust the air volume to use most of the ordinary mortar and special mortar to achieve multiple purposes in one machine, and use different materials with different Automatic Mortar Spray Machine to achieve mixing and spraying.
Routine maintenance: (1) Inspection and maintenance before operation 1. Electrical equipment: including the inspection of the motor, power supply and transmission lines, electric control box, and each switch should be in a prescribed state. 2. Lubricant: The hand oil pump is forced to refuel several times. 3 Check the hopper for debris and slag accumulation. 4 Inspection of shotcrete hoses, nozzles and air ducts. 5 Equipment air transportation inspection a. Jog the motor to check the direction of rotation (main motor clockwise, air compressor counterclockwise); b air compressor, air pressure, air volume, air gun adjustment; c check that the instrument is only the condition, especially whether the voltage reaches Design requirements (380v), check transmission lines, wire diameter distances and joint connections, etc. 6 The setting of air pressure and air flow is caused by the loosening of air pressure switch parts during transportation, and the pressure spring should be readjusted.
