The automatic mortar spray machine has a simple structure. When conveying the mortar, the mortar does not touch the metal parts, and the vulnerable parts are relatively single, mainly the extruded tube, which is convenient for maintenance and management. Small size, light weight, and convenient operation. Low cost, especially suitable for small-scale project construction under low-cost conditions. The grouting pump produced by our company has the advantages of low energy consumption, low vibration, low noise, small size, high efficiency, stable and reliable performance, convenient pressure and flow adjustment, and long service life.
When the automatic mortar spray machine is running, working for a period of time or performing technical maintenance, the entire vehicle line should be inspected, and the following points should be checked during the inspection:
1. Fixed condition. Whether the electrical components and wires are fixed firmly and reliably, whether the outer body is intact and whether the parts are intact.
2. Clean and contact conditions. There are oil stains, dirt and dust on the wires. Whether each contact has rust, grease and corrosion, and whether the wire joints are good.
3. Insulation and shielding conditions. Whether the wire insulation layer and its insulation material are damaged or aged, whether the bare wire is covered with tape or covered with an insulating sleeve; whether the wire shielding layer is broken or scratched.
4. Wiring status. Whether the wire number of the wire at the spare connection point meets the requirements, and there is no disorder or wire end falling off.
5. Insurance line status. The insurance of each circuit is complete and intact, if necessary, use the instrument to save the apricot, Shandong wall wiper, whether the fusible wire, fuse wire, and open circuit are in good contact, and whether the parameters meet the rated value of the circuit. Operating conditions. Whether each circuit control switch works normally, whether there is card issuance or malfunction.
Since the automatic mortar spray machine is a kind of equipment used for plastering, plastering and plastering the interior walls of buildings, its function is to evenly spread the plastering materials such as cement mortar and dry mortar on the red bricks and add air Bricks are waiting on the wall. The functional characteristic of the intelligent wall plastering machine is that it can shape the smoothed wall at one time, smooth and flat, simple to operate, and save time and effort.
