Automatic Mortar Jetting Machine May Vary Slightly Depending On The Specific Model And Manufacturer.

1. Preparation:

   • Ensure that the machine is placed on a stable and flat surface.
   • Check all connections, hoses, and fittings to ensure they are secure and in good condition.
   • Fill the hopper or tank with the appropriate mortar mixture according to the manufacturer's instructions.

2. Start-up:

   • Turn on the power to the machine and any auxiliary equipment such as compressors.
   • Activate the control panel or interface and set the desired parameters such as spraying pressure, flow rate, etc.

3. Prime the System:

   • Open the material flow valve and allow the mortar mixture to flow through the system until it reaches the spraying gun. This helps to remove any air bubbles and ensures a smooth flow of mortar.

4. Adjust Settings:

   • Adjust the spraying pressure, nozzle angle, and other parameters as needed based on the type of surface and desired finish.

5. Begin Spraying:

   • Hold the spraying gun at the desired distance and angle from the surface to be plastered.
   • Activate the spraying mechanism and move the gun in a controlled manner to apply an even layer of mortar onto the surface.
   • Ensure overlapping strokes to achieve uniform coverage.

6. Monitor and Adjust:

   • Continuously monitor the Automatic Mortar Jetting Machine process, adjusting parameters as needed to maintain consistent spraying quality.
   • Pay attention to any clogs, blockages, or irregularities in the flow of mortar, and address them promptly.

7. Shutdown:

   • Once Automatic Mortar Jetting Machine is complete, close the material flow valve to stop the flow of mortar.
   • Turn off the power to the machine and any auxiliary equipment.
   • Clean the spraying gun, hoses, and other components thoroughly to prevent clogging and ensure longevity of the machine.

8. Maintenance:

   • Perform regular maintenance tasks such as cleaning, lubricating, and inspecting components to ensure optimal performance and longevity of the machine.
   • Follow the manufacturer's guidelines for maintenance intervals and procedures.

9. Storage:

   • Store the machine in a dry and secure location when not in use, following any specific storage instructions provided by the manufacturer.

By following these steps and adhering to safety guidelines, you can effectively use an automatic mortar jetting machine to streamline plastering processes and achieve high-quality finishes in construction projects.