Compared with the traditional mortar mixed on site, the biggest difference between the mortar spraying machine is the introduction of a series of additives that can optimize the performance of the mortar, which makes the new mixed mortar easy to work, high water retention and long. After the distance and large height pumping, it still has good working performance. The biggest advantage of the mortar spraying machine is its high construction efficiency and good quality of the mortar after molding. Because the mortar has a large initial speed during spraying, mortar spraying machine can have a strong adhesion to the substrate and can effectively reduce hollow cracking happened.
During the transportation and mechanical spraying of the mortar spraying machine, some problems may occur due to various reasons, such as: power transmission problems, pipe plugging problems, construction safety problems, etc. The mortar spraying machine is a high-power electrical equipment. When connecting the power, first check whether there is any defect in the cable line. Secondly, pay attention to whether the ground wire is handled properly, whether the forward and reverse rotation of the motor is normal, and finally pay attention to the connection firmly to avoid phase loss. If there is any abnormality, the power supply should be cut off in time for rectification and repair.
The mortar spraying machine belongs to small and medium-sized mechanical equipment, but it still has a certain degree of danger because it requires a certain pressure during the pumping process. Especially in high-rise construction, mortar spraying machine is necessary to pay special attention to the safety of construction personnel. Therefore, the mortar sprayer needs to place the spraying equipment in a reasonable position during construction. The operators must cooperate with each other. Mortar spraying machine is strictly forbidden to use the spray gun to aim at anyone. Strictly prevent physical injury or property damage caused to people due to human factors.
