Mortar spraying machine in recent years we may not be unfamiliar, it is widely used in the construction site of wall spraying, rapid mortar spraying machine mainly by the drive device, rotor assembly, wind system, jet system, electrical control system and other parts. Today we're going to talk a little bit about those.
1. The driving device is connected to one end of the machine by the motor and the cycloid reducer, and the motor is directly mounted on the reducer, parallel to the axis of the rotor and stator.
2. The rotor assembly is made of special alloy material, which is quenched and modulated by high temperature. The stator is generally made of special rubber material, so as to improve the abrasion resistance, strength and reduce the maintenance workload.
3. The air system uses the motor to drive the air compressor to produce high pressure air pressure, which is then provided to the spray gun through the safety valve and pressure limit valve, and the slurry and sand are ejected.
4. The spray system is the most important system of the mortar spraying machine, which is composed of the feeding hose and the spray gun. The feeding hose is generally made of wear-resistant slurry pipe, while the spray gun is made of high polymer material. The gun is fixed on the gun by mortar pipe, air pipe and air valve.
5. The electrical control system consists of leakage air automatic switch, ac contactor, thermal relay and start and stop buttons, which can effectively protect against leakage, excessive current and short circuit.
The above points about the product structure of mortar spraying machine hope to help you, more professional knowledge of mortar spraying machine, please feel free to contact us!!
