We all know that mechanical equipment is in need of maintenance, often maintenance can extend the use of time, there are many customers in the purchase of the mortar spraying machine is not clear how to maintain, leading to the equipment in a very short time abnormal, reduce the characteristics of the mortar spraying machine, and even endanger the service life of the equipment. How do you maintain the equipment? The following Shandong China Coal Group tells you how to maintain the mortar spraying machine.
Commonly used mortar spraying machine project site selection are all in very cold areas, and spray bin must be a lot of mixed mortar or some other coating raw materials coating, we all know that the natural environment on cold is very easy to make iron rust, the manufacture of people together to avoid this problem, there is often an vulcanized rubber cushion block cyst, buffer block is spare parts, broken to find manufacturers. But did not prevent is very easy to rust, rust is too loose saw so ugly, if there is a unique material words will environmental pollution coating raw materials, coating effect, so in after application of the equipment, must be clean and dry immediately, it can avoid rust, if have a diversity of raw materials, the necessary at that time can also wipe anti-corrosive paint to avoid this situation.
Remember that moment must be concerned with the nozzle have blocked, because the mortar spraying machine at the time that the coating is usually most spraying mortar, nozzle is small, slurry particles is very prone to the condition of the concrete segregation, so in that time, the maintenance of spray gun segregation is a difficult to deal with problems. When the first spraying slurry to go through sand screening again, so as to avoid excessive blocking of particles, and if the application of the mortar spraying machine, to immediately clean the relevant parts, to avoid mixing mortar in the equipment condensation, resulting in blocking.
