The engineering quality of the automatic mortar spray machine is guaranteed. The automatic mortar spraying machine has a large flow rate and high pressure, and the mortar density far exceeds the national standard, avoiding troubles and losses caused by quality, construction period, labor cost and other issues. The mortar spraying machine can be used for multiple purposes, that is, it can spray mortar or spray fireproof materials, refractory materials, perlite insulation mortar, and thermal insulation granular mortar. It is not affected by regional and environmental conditions and the shape of the spray surface.
Turn on the power of the automatic mortar spray machine, press the button, and the screw pump starts to work. If the steering is reversed, press the stop button to stop. Adjust the power supply and reverse the beginning to change the steering. If the opposite direction is not output. Inject a small amount of water into the inlet of the delivery hose, or use a screw pump to moisten the delivery hose, and then gradually drain the water in the pipe from the outlet. The water must be clean and no residual water should be left in the pipe.
Press the start button of the automatic mortar spray machine, and the spraying work will begin. When working, combined with adjusting the air volume, the spraying quality can be optimized. The adjustable-speed screw pump of the automatic mortar spraying machine has an output flow of 0-8 liters/min. During work, as long as the return flow is adjusted to the output speed suitable for the construction requirements. Stirring materials must be continuously added to the hopper to ensure the continuity of spraying work.
When the spraying work of the automatic mortar spraying machine needs to be suspended, just press the stop button to make the operation more convenient. The following methods can be used for remote control: the middle knob of the electric box to the left button is a manual control switch. Before the spraying work of the automatic mortar spray machine is finished, after the remaining material in the hopper is sprayed, the air pump is turned off, and then it is stopped.
