For maintenance after use of Mortar Spraying Machine, clean water is used for the delivery pump of the concrete spraying machine. Impurities in the water are easy to block in the water pipe, especially at the connection with the water tank; and affect the service life of the water pump.
Adjustment and homing: After the Mortar Spraying Machine has been working for a period of time, the rubber plate, steel lining plate and other parts will inevitably produce a kind of friction and form a gap. At this time, you need to manually adjust it to reset it.
Regularly check hydraulic components: hydraulic components refer to some parts related to the pressure system, including oil tanks, safety valves, etc. If these parts have problems, they must be dealt with immediately.
Add lubricating oil in time: For the Mortar Spraying Machine, without lubricating oil, it is difficult for the machine to run smoothly, and forced operation will damage the machine. In addition, if the lubricating oil is not clean enough, it will also cause the machine to wear out. Therefore, check whether the lubricating oil needs to be cleaned and added during daily maintenance.
