While you use the cement plaster spraying machine, press the hand oil pump several times to fill the transmission part with oil at first. After turning on the power, start the main motor first, and check whether the rotation direction of the rubber conveying screw is consistent with the direction indicated by the arrow. If it is inconsistent, change the power phase line. Note that this check must be performed every time the power is turned on again. Connect the delivery hose and nozzle. Add 5 liters of clean water to the hopper, start the motor to pump the clean water out to wet the hopper, pump body and delivery hose.
After the work is completed, immediately drain the remaining material in the hopper, and pour enough clean water into the hopper to thoroughly clean the hopper, and then start the machine and pump the water out to clean the hose and nozzles until the pump is all clean water. The cleaning is over. In the construction industry, spraying of mortar on external walls, spraying of external wall insulation materials, mortar brushing, spraying of refractory materials, spraying of large-area fireproof materials for buildings. During the construction of the new product, the cement plaster spraying machine was used as an agent to improve the construction efficiency of the overall project.
The cement plaster spraying machine adopts automatic solution technology, which can complete the groundbreaking practical effect of building wall plastering in a high, time-saving and labor-saving manner.
