The biggest difference of the mortar spraying machine is the introduction of a series of admixtures that can optimize the performance of the mortar, so that the new mixed mortar has good workability, high water retention, and still has good working performance after long-distance and large-height pumping. The biggest advantage of the mortar spraying machine is the high construction efficiency and the good quality of the mortar after forming. Because the mortar has a large initial speed during spraying, it can have a strong adhesion to the substrate and can effectively reduce the phenomenon of hollow drum cracking occur.
Mortar spraying machine is a high-power electrical equipment. When connecting to electricity, first check whether the cable is missing or leaking. Secondly, you need to pay attention to whether the ground wire is properly handled and whether the motor is normal or not. Finally, you should pay attention to the wiring firmly to avoid There is a lack of phase. If there is any abnormality, cut off the power supply in time for rectification and repair.
Safety responsibility is heavier than Mount Tai. Mortar spraying machine is a small and medium-sized mechanical equipment, but due to the certain pressure required during the pumping process, it is still dangerous. Especially in high-rise construction, special attention should be paid to the safety of construction personnel. Therefore, the spraying equipment needs to be placed in a reasonable position during construction, and the operators must cooperate with each other. It is strictly forbidden to use the spray gun at anyone to prevent physical injury or property damage caused by human factors.
