Mortar spraying machine is widely used in building construction. Mortar spraying machine has the characteristics of high efficiency and humanization. It replaces the traditional manual loading construction mode and saves labor. The mortar spraying machine avoids the damage of manual loading and dust to construction personnel, and at the same time avoids labor Waste caused by residual material on the unhardened working surface during loading. The transportation and spraying operation of the mortar spraying machine must be carried out in strict accordance with the safety operation regulations.
Safety operation rules for mortar spraying machine
1. Carry out a careful inspection before starting the mortar spraying machine to ensure that there are no exposed wires, aging, leakage, short circuit, etc., and eliminate potential safety hazards.
2. Check whether the hydraulic oil, brake oil, engine oil and other oils of the mortar spraying machine are in sufficient quantity and whether there is leakage.
3. Check whether the lamp and warning signs of the mortar sprayer are normal, and ensure that the equipment grounding device is normal and the brake device is working properly before starting the equipment.
4. After starting the mortar spraying machine equipment, check whether there are any abnormalities in the display of various meters.
5. Before starting the mortar sprayer equipment, other personnel must return to a safe range. Staying, climbing, or standing near the equipment is strictly prohibited.
6. When adding fuel, the equipment must be in a stopped working state and kept away from the fire source.
7. If there is abnormal noise when the mortar sprayer is working, it must be shut down immediately for inspection, and the work can be continued after the abnormal noise is eliminated.
8. The power must be shut down during maintenance. If the silo must be lifted during maintenance, the silo must be supported and fixed. It is strictly forbidden to enter the silo underneath the silo for maintenance when only the oil cylinder supports the hopper.
9. Check and replace parts and accessories in time, and strictly prohibit working with equipment.
When the mortar spraying machine sprays the concrete, because the cement particles and the aggregate collide with each other, continuously squeeze, and use a small water-cement ratio, the concrete has sufficient compactness, higher strength and better durability.
