The automatic mortar spray machine is a large-displacement mortar spraying machine with functions of pumping, bonding and spraying operations. High transportation efficiency, long pumping distance, easy to pump large particle mortar, can be used for spraying pre-mixed mortar and on-site mixing mortar. The following describes how the automatic mortar spray machine is maintained during and after operation.
Inspection and maintenance in spraying operation of automatic mortar spray machine
1. Check whether all the instruments, buttons, air pressure switches, ball brakes of each circuit and the motor temperature are normal for electrical equipment
2. The spraying hose, spray head and air pipe are all sealed and fixed. There should be no signs of knotting and damage to the air duct and spray pipe.
3. Air system: check the joint sealing, fixing and air pressure, air volume and working conditions, etc.
Maintenance after operation of automatic mortar spray machine
1. Cleaning of grouting hose, air pipe and nozzle
2. Cleaning and inspection of equipment
3. Air compressor. Cut off the power supply, wind source, close all valves, and check all parts.
4. The electrical part cuts off the power and inspects all parts.
5. Remove the supercharged nails and rotor, and reassemble after cleaning.
6. Other processing problems found during operation, cleaning, maintenance, etc.
