The automatic mortar spray machine is suitable for spraying materials: putty powder, paint, latex paint, real stone paint, cement mortar, dry powder mortar, thermal insulation mortar, waterproof material, fireproof material, thermal insulation material, sound-absorbing material and other water-soluble materials. The automatic mortar spray machine can adjust the flow rate and bring out the best spraying effect.
The automatic mortar spray machine needs regular maintenance and maintenance, so that its life will be greatly increased, saving your use cost. Here we introduce the maintenance and maintenance methods of automatic mortar spraying machine:
1. First of all, the lubricating oil in the bearing housing should be replaced regularly, generally every 6 months under normal circumstances.
2. Secondly, keep no water marks on the motor of the automatic mortar spraying machine to prevent the motor from being damp, which will affect the use and safety of the equipment.
3. In the cold season, if there is icing after the pump is stopped in the cold season, the cooling water should be connected to the seal first, if necessary, the water can be heated to defrost, and then the coupling should be driven by hand until the operation is flexible. Follow the startup steps to drive.
4. The pump with cooling water device should be connected to the cooling water before starting the drive. When the pump is running normally, it can continue to be connected, and it can be stopped if the conditions do not allow.
5. The operation of the pump when the outlet valve is closed is called the closed-pressure operation state. The closed-pressure operation time of the all-plastic pump or plastic-lined pump should be shortened as much as possible. The normal temperature medium is not more than 5 minutes, and the high temperature medium is not 2 minutes.
In addition to being able to switch on the electric control box, the automatic mortar spray machine is also equipped with a remote control switch for spraying. The connection between the spray gun and the feed tube can be rotated for easy operation. High construction efficiency and good quality.
