Cement plaster spraying machine is mainly developed for the characteristics of building construction. Cement plaster spraying machine is suitable for large area and high efficiency construction of cement mortar filling layer or mortar filling layer in construction engineering. The basic principle of the cement plaster spraying machine is that the pressure oil generated by the electric motor drives the oil pump to drive the oil cylinder, and the oil cylinder piston rod drives the concrete cylinder piston to push the concrete into the conveying pipeline. The hopper is sucked into the concrete cylinder and transported to the pouring site through the conveying pipeline. Some considerations for the construction of the cement mortar sprayer are to do a good job of inspecting and replacing each component. If there is serious wear, replace it with a new one, and also allow the connection and fastening between the components.
Inspection work of cement plaster spraying machine parts: When the fine stone concrete pump is constructed, the hydraulic components must be checked. If any problems are found, the cause of the failure must be found and repaired. Then it is necessary to check whether the hydraulic system is operating normally, and whether the hoses, connectors, cylinders, etc. are worn or cracked to ensure that the connectors are complete and tight. If the pipeline is damaged, the damaged delivery pipe must be replaced.
Tightening of cement plaster spraying machine: the tightening is also often required during the construction of the fine stone concrete pump. Check whether the tightening bolt connection is loose, the concrete cylinder, the tie rod bolt and the nut, the cylinder joint and the frame connecting bolt , The connection bolts of the outlet of the S valve are fastened, there are some places that are prone to leakage, such as liquid level gauge, oil drain plug, oil pump, oil pipe joint, oil cylinder, etc. These parts also need to be done to prevent oil leakage Otherwise, the construction of the cement mortar spraying machine can not be ensured well, and it is easy to cause many failures.
