The coating of the cement plaster spraying machine is uniform and smooth, with good texture, the spraying equipment has a large flow rate, and the pressure is high. The spraying machine has a wide working range. The paint is atomized into fine particles under high pressure and is evenly distributed on the wall surface. High efficiency and low labor intensity.
Operation rules of cement plaster spraying machine :
1. Turn on the power and press the button to start the screw pump. If the direction is reversed, press the stop button to stop. Adjust the power supply and reverse switch to change the direction.
2. Inject a small amount of water at the inlet of the conveying hose, or use a screw pump to wet the conveying hose, and then gradually discharge the water in the pipe from the outlet. The drain should be clean, and no excess water should be left in the pipe.
3. Bind the air pipe and the mortar pipe side by side, and connect the air pipe to the spraying machine.
4. Load the material with even mixing into the hopper.
5. Press the start button to start the spraying work. When working, combined with adjusting the air volume, the spraying quality can be optimized.
6. The adjustable speed screw pump has an output of 1-8 liters / min. In the work, as long as the return flow is adjusted to the output speed suitable for the construction requirements.
7.Cement plaster spraying machine stirred materials must be continuously added to the hopper to ensure the continuity of the spraying work. When the spraying work needs to be suspended, press the stop button.
8. Cement plaster spraying machine before the spraying work is completed, after the remaining material in the hopper is sprayed, turn off the air pump and stop after completion.
9. Remove the sprayer, and gradually clean the disassembled parts.
