Cement mortar spraying machine is a new technology. These products have been used abroad for many years, and it is absolutely no problem to use them. That is because of the shortage of domestic workers and the rising wages of construction workers, people have begun to introduce new technologies and new equipment. Of course, the earliest use of new equipment will benefit the most. Once they are all popularized, it is time to fight the price war again. This is the situation in China. Be the first to eat crabs, you will get the most. The cement mortar spraying machine, multi-functional putty spraying machine, screw pump, piston cement spraying machine produced by our company can make you 5-6 times more money for each product. And the multi-functional putty sprayer can also spray paint, real stone paint, gypsum, perlite, abrasive mortar, etc., will not block the gun, suitable for all kinds of walls, your satisfaction is our success.
Product advantages
Operation specification of cement mortar spraying machine
1. Turn on the power and press the button to start the screw pump. If the steering is reversed, press the stop button to stop. Adjust the power and reverse the beginning to change the direction. If it is in the opposite direction, the material will not be discharged.
2. Inject a small amount of water at the inlet of the delivery hose, or use a screw pump to wet the delivery hose, and then gradually discharge the water in the pipe from the outlet. The water should be clean and no excess water should be left in the pipe
3. Tied the wind pipe and the mortar pipe side by side. Connect the air duct to the spray gun.
4. Fill the hopper with evenly mixed materials (can be used with powder opener).
5. Press the start button, and the spraying work will start. When working, combined with adjusting the air volume, the spraying quality can be optimized.
6. The adjustable speed screw pump has an output flow of 0-8 liters / min. In work, as long as the return flow is adjusted to the output speed suitable for the construction requirements.
7. Stirred materials must be continuously added to the hopper to ensure the continuity of the spraying work.
