Mortar spraying machine is specially used for spraying mortar professional spraying machine, aimed at mortar particles in 4 or 5 mm below the mortar can be used for spraying. Next, small make up to give you a simple introduction to the working principle of the mortar spraying machine and product structure.
One. working principle
Mortar spraying machine is the mixing material of distribution mixing machine mouth (or artificial mixing materials and feeding), after vibration sieve supply to the sprayer in the hopper, the screw conveying kun to high pressure chamber, and made high pressure, high pressure of the high pressure rotor stator rotating, the mortar after high pressure pipeline to the spray gun, introduced by spray gun and a high wind, blows away the supplies, acceleration spray out.
Two. Product structure
The rapid mortar spraying machine is mainly composed of driving device, rotor assembly, wind system, jet system, electrical control system and so on.
1. The driving device is connected by the motor to the cycloid reducer and installed at one end of the machine. The motor is directly installed on the reducer, parallel to the axis of the rotor and stator. Motor model: y132s-4-5.5kw, voltage: 380V, speed: 1440 RPM, deceleration model: bx1-4, speed ratio: 1:9;
2. The rotor of this machine is made of special alloy material, which is quenched and modulated by high temperature, and the stator is made of special rubber material, so as to improve the abrasion resistance, strength and reduce the maintenance workload;
3. The air system is driven by a 2.2kw motor to produce high pressure air pressure of the air compressor, which is provided to the spray gun through the safety valve and pressure-limiting valve, and the slurry mortar is ejected;
4. The injection system is composed of the feeding hose and the spray gun, the feeding hose is made of wear-resistant slurry pipe, the spray gun is made of polymer material, and the mortar pipe, air pipe and air valve are fixed on the spray gun;
5. Electrical control system: the control box is composed of leakage air automatic switch, ac contactor, thermal relay and start and stop buttons, which can realize leakage, over-current 6s, short circuit and other protection functions.
The above is to share with you about the product structure and working principle of mortar spraying machine related content, I hope that through small make up of the content of the above simple explanation, can let you have a further understanding and understanding of mortar spraying machine this product.
