What are the development prospects of mortar spraying machines? This is the situation that many people want to know. With this question, let us introduce the relevant situation.
Screw pumps generally wear out quickly, because the speed of wear and the material relationship is very large, no one can determine how much mortar can be sprayed by a screw pump. For on-site mixing mortar, the general particles are about 6 mm, and the screw pump can be pumped. The particles to be delivered are larger than 6 mm, generally about 8-10 mm. For the technical parameters of the pump, it is possible to pump 6 mm of pellets. This pump is suitable for ready-mixed mortar and is not suitable for on-site mixing materials.
The new multi-functional mortar spraying machine is suitable for traditional mortar and pre-mixed mortar, special materials, cement grouting and decorative mortar spraying. The machine is available in any material with a particle size of 6 mm, a condensing time of 60 minutes and a density suitable for passing through the hose. Suitable for reinforcing plaster, smoothing cement brush, insulation brush, self-leveling plaster, leveling mixture, insulation mortar, bonding mortar, lime powder brush, repairing plaster, surface ash, tile and filler plaster.
The mechanical efficiency is 3-6 times that of manual production. For wall plastering, it is equivalent to saving 2 yuan per square meter of labor and shortening the construction period.
When using the mortar spraying machine, be sure to master the correct spraying method. The safety points that need to be noted are as follows:
1. If the hanging items need to be sprayed, it is recommended that the user thoroughly clean them, and always keep the items to be grounded.
2. The staff should pay attention to the painting room, and the floor in the room should be kept conductive.
3. Professional painters must be equipped with equipment when working. It is recommended to wear energetic shoes.
4. After spraying, clean up your own equipment.
5. The staff should pay attention to: During the operation, all kinds of conductive objects in the painting room must be grounded.
